| 型號 Model | YW-T500A | YW-T600A |
| 功率 Power | 3HP | 3HP |
| 本機尺寸 Machine Size | 980*860*1660MM | 1080*980*1660MM |
| 電源 Voltage | 220V 60HZ/ 380V 50HZ | 220V 60HZ/ 380V 50HZ |
| 機械淨重 Net Weight | Approx. 1200KG | Approx. 1600KG |
特性/ Features :
1. 本機採用水壓式壓著，平均拉力約7KG/CM，全方位壓著，均無死角。
YW-T500A contained an average 7KG/CM pull force of Hydrostatic Press system, which it will press every single corner of input material and it will provide good output result.
2. 本機液壓方面採用為水溶性、無毒，沒有環保問題困擾。
The Hydrostatic Press system is water soluble and non-toxic, which it is safe to people and to the environment.
3. 本機採用安全光柵緊急剎車按鈕，安全開關及壓克力擋板，更加保護操作人員的安全。
YW-T500A contained a automatic laser sense emergency stop system, emergency stop button and acrylic covers, to well protect operator from any harm.
4. 另裝有自動故障檢測功能，便於維修提高工作效率。
The automatic fault reporter will shows the problem to operate for minimizing time taken from repair.
5. 本機一次性可完成三種壓著（前後，上下，左右），可減少多機多人，從而節省人力、物力及製造流程。
The machine is capable to perform 3 ways of pressing, Front-back, top-bottom and left-right; thus, during process, the YW-T500A require less labor to operate, and short the time for operator to place (and replace) input materials.
YW-T500A contained an average 7KG/CM pull force of Hydrostatic Press system, which it will press every single corner of input material and it will provide good output result.
2. 本機液壓方面採用為水溶性、無毒，沒有環保問題困擾。
The Hydrostatic Press system is water soluble and non-toxic, which it is safe to people and to the environment.
3. 本機採用安全光柵緊急剎車按鈕，安全開關及壓克力擋板，更加保護操作人員的安全。
YW-T500A contained a automatic laser sense emergency stop system, emergency stop button and acrylic covers, to well protect operator from any harm.
4. 另裝有自動故障檢測功能，便於維修提高工作效率。
The automatic fault reporter will shows the problem to operate for minimizing time taken from repair.
5. 本機一次性可完成三種壓著（前後，上下，左右），可減少多機多人，從而節省人力、物力及製造流程。
The machine is capable to perform 3 ways of pressing, Front-back, top-bottom and left-right; thus, during process, the YW-T500A require less labor to operate, and short the time for operator to place (and replace) input materials.